Turning Table
The advantages of the turning table
- evacuation of several moulds
- turning table to be mounted by a single operation
- height-adjustable by means of a lift
- practical and time-saving
With the aid of the turning table, several moulds can be filled during the evacuation process. The appropriate quantity of resin is filled into the funnel and flows into the mould below.
Then the next mould is positioned under the drain by means of a key switch, and filled. Especially resins with a longer pot life are suitable for this process. The turning table can also be mounted later on by a single operation, provided that the system has been ordered with the respective preparation. In connection with the lift, the whole unit can also be adjusted vertically.
